Figure 6-3.—Work center VIDS board.
cards are initiated, each card will reflect identical
Blue is used in the LIM block to indicate limited
information consisting of a job control number
capability.
(JCN), assigned by maintenance control, and a brief
description of the maintenance to be performed; the
Red is used in the DN block to indicate that the
work center also initiates a MAF at this time. The
equipment is out of commission.
PRIORITY section of the card will also be color
coded, as required, to indicate the system and
No Color is used or required if maintenance is
maintenance
status
concerning
equipment
routine and does not affect equipment operability.
operational capability.
These color codes are
standardized as follows:
Black is used when a maintenance action has
been completed and inspected at the proper level
and only a functional check remains to return the
6-7
